Naphthalene Superplasticizer High Range Water Reducing Agent

Naphthalene Superplasticizer High Range Water Reducing Agent

1. Naphthalene Superplasticizer Introduction:
Naphthalene formaldehyde sulphonate water reducing agent is a synthetic powder based onbeta-sulphonate formaldehyde ondensate and reactive polymer.

It has the properties of high range water reduction, set retarding and excellent strengthening.
Elt-sodium sulfate is less than 10% , suitable to middle strength or high strength
concrete where high range water reduction is desired.

A. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the
early stage of application, extremely prominent effects are shown. As the result, the modulus and
site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is
consumed.
B.Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete.
C.Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town
planning projects and dwelling erections etc.
D.Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash
cement and Portland pozzolanic cement etc.
3.Naphthalene Superplasticizer Add the amount

A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio:60%).

Cie-China.org is the leading foam concrete additives provider providing concrete foaming agent, superplasticizer,foam concrete strength enhancer for lightweight concrete, CLC blocks. If you are looking for superplasticizer, please feel free to contact us.