How To Attach Furring Strips To Concrete Block Wall

To attach furing strips to concrete block walls, follow these steps:

(How To Attach Furring Strips To Concrete Block Wall)

Step 1: Measure and mark the dimensions of your concrete block wall Before attaching the furing strips, measure the dimensions of your concrete block wall using and tape. Make sure to account for all edges and corners in the wall. Step 2: Gather materials Start by gathering the necessary materials such as furing strips, nails or screws, glue, and some power cord. If you have not already purchased these items, they can be ordered online or at local hardware stores. Step 3: Prepare the surface of the wall If the concrete block wall is rough or uneven, make sure it is prepared before attaching the furing strips. Use a putty knife or sandpaper to smooth the surface and create a level surface for attaching the strip. Step 4: Place the furing strips on the wall Thread one furing strip onto each corner of the wall, making sure to keep them tight. Ensure that the furing strips do not overlap too much. Step 5: Build up the edge After attaching the furing strips, build up the edge by spacing out the furing strips slightly. This will help to prevent the strips from intersecting during movement. Step 6: Apply a glaze or varnish If desired, apply a glaze or varnish to the finished product. You can use a paint, spray, or something similar to a weathered wood look. Step 7: Put it away Once the Furing strips are installed, place it back in its location on the wall. You may need to adjust the position of the strips to ensure that they fit perfectly without overlapping.

(How To Attach Furring Strips To Concrete Block Wall)

Overall, attaching furing strips to concrete block walls requires patience, precision, and knowledge. By following these steps, you can achieve a beautiful and functional result.
hot tags: concrete,concrete additives