10mm Silica aerogel insulation mat with aluminium foil aerogel sheet carbon aerogel powder
fiber precast rcc concrete pipe drain making machine
rheological additives for cement pce polycarboxylate superplasticizer concrete admixture
Polycarboxylate Superplasticizer For Concrete Water Reducer Admixture Polycarboxylate Pce Powder Superplasticizers For Concrete
Waterproof Plastic Sheeting Vapor Barrier Film Under Concrete Slabs
Calcium Stearate Emulsion
Overview of factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate
Concrete additives, also known as admixtures, are substances added to concrete during the mixing process to enhance specific properties of the fresh or hardened concrete. These additives serve diverse purposes, ranging from improving workability and durability to accelerating or retarding the setting time and enhancing the strength and finish of the final product. Concrete admixtures play a pivotal role in optimizing concrete performance for various construction applications and environmental conditions.
Features of factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate
Workability Improvement: Plasticizers and superplasticizers increase the flowability of concrete without adding water, improving workability and pumpability.
Setting Time Control: Accelerators speed up the setting and hardening process, while retarders slow it down, allowing for more time for placement and finishing in hot weather or complex structures.
Strength Enhancement: Some additives increase the compressive and flexural strength of concrete, leading to more durable structures.
Durability Improvement: Corrosion inhibitors, waterproofing agents, and air-entraining admixtures protect concrete from freeze-thaw cycles, chloride ingress, and chemical attacks, prolonging service life.
Color and Finish Enhancements: Pigments and finishing aids can be added to give concrete a desired color or texture.
Shrinkage Reduction: Admixtures that reduce the amount of water needed or control evaporation can minimize shrinkage cracking.
(factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate )
The chemical formula for CAS number 527-07-1 is Na2SO4·6H2O, and it is typically used as a corrosion inhibitor or concrete retarding agent. The concentration of the inhibitor varies depending on the specific application. The "min98%" in this formula refers to the minimum inhibitory concentration (MIC) of the inhibitor at 98%. This value indicates that the inhibitor should be applied in concentrations up to 98% of its maximum inhibitory concentration (MIC) to effectively prevent corrosion in metal parts. In general, the concentration of the sodium gluconate in a factory supply CAS 527-07-1 may range from 1% to 5%, depending on the specific requirements of the application. It is important to follow the manufacturer's guidelines and test the concentration before using the inhibitor in any practical applications.
(factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate )
Cie-China is a trusted global metal material supplier & manufacturer with over 12-year-experience in providing super high-quality concrete additives and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality concrete materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
L/C, T/T, Western Union, Paypal, Credit Card etc.
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
Applications of factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate
Structural Concrete: In high-rise buildings, bridges, and other load-bearing structures to improve strength, durability, and early age strength gain.
Precast and Prestressed Concrete: To enhance workability for intricate shapes, control setting time, and improve surface finish.
Repair and Rehabilitation: For restoring and strengthening aging infrastructure, improving bond strength, and ensuring compatibility with existing concrete.
Concrete Floors and Pavements: To increase wear resistance, reduce permeability, and improve placement properties.
Cold Weather Concreting: Using accelerators to maintain setting time and early strength development in low temperatures.
Sustainable Construction: Water reducers and recycled materials-based admixtures contribute to more eco-friendly concrete production.
FAQs of factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate
Q: Is factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate necessary for all projects? A: Not all projects require admixtures, but they can significantly improve efficiency, quality, and durability when needed.
Q: Can factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate negatively affect concrete quality? A: If not used correctly, some admixtures can lead to issues like excessive bleeding, reduced durability, or surface defects. Proper dosage and selection are crucial.
Q: Is factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate compatible with each other? A: Compatibility between admixtures varies. Consultation with manufacturers or experts is necessary to ensure combinations do not interact negatively.
Q: Is factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate environmentally friendly? A: Many modern admixtures are designed to be eco-friendly, reducing water consumption and CO2 emissions. However, some may contain chemicals requiring careful handling.
Q: How is factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate added to concrete? A: factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate is typically dosed in liquid or powder form, either directly into the concrete mixer or pre-diluted in measured amounts of mixing water.
(factory supply CAS 527-07-1 min98% corrosion inhibitor/Concrete Retarder Sodium gluconate )
Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.
